SonicWALL Secure Remote Access Solutions SSL-VPN 2000 User Manual download pdf (Page 13)

Page 12

3. Select X0 in the Interfaces drop down list.

4. Click the Accept button.

Adding a NetExtender Client Route

NetExtender allows remote clients to have seamless access to resources on your local

network.

1. Navigate to the NetExtender > Client Routes page.

2. Click the Add Client Route button.

3. Enter the IP address of the trusted network to which you would like to provide access

with NetExtender in the Destination Network field. (For example, if you are

connecting to an existing DMZ with the network 192.168.50.0/24 and you want to

provide access to your LAN network 192.168.168.0/24, you would enter

192.168.168.0).



Note: You can optionally tunnel-all SSL-VPN client traffic through the NetExtender

connection by entering 0.0.0.0 for the Destination Network and Subnet Mask.

Some operating systems or system environments do not correctly apply the 0.0.0.0

default route. If this is the case, you may also specify tunnel-all operation by using

two more specific routes as follows:

4. Enter your subnet mask in the Subnet Mask field.

5. Click the Add button to add this client route.

Route 1 Destination Network: 0.0.0.0

Subnet Mask: 128.0.0.0

Route 2 Destination Network: 128.0.0.0

Subnet Mask: 128.0.0.0

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 85 86

No comments

SonicWALL Secure Remote Access Solutions SSL-VPN 2000 User Manual Page 13